50mm/75mm/100mm/150mm/200mm/300mm PUR/PIR Polyurethane Sandwich Panel Used on Cold Storage/Cold Room

A slurry distributor is reasonably designed for the sites where multiple screens or multi-stack screen installed. The best slurry distributor splits slurry flow into every stream evenly based on quality, weight, density and size distribution. A typical five hole distributor is designed with two cylinders, inner cylinder and outer cylinder, and five chamber are divided between the inner and outer cylinder. The slruuy flow is fed into inner cylinder and evenly disttibuted into chamber. The inside surface of slurry distributor can be lined both wear-resistant rubber and polyurethane wear parts. The plug valves is designed to stop slurry of one or multiple streams.
According to the site layout requirements, slurry distributor can be fed from the top or bottom. Sometimes two section layout may be applied when the screen quantity is large.
Our technicians will adjust the design to meet the special requirements for the distributor.
You Might Also Like
30t Swing Type Orange Peel Grab for Handling Scrap S...
Stone Crusher for 18ton Excavator Attachment
CNC Plastic Finishing Flat Bottom Hole (HS-TP-017)
Mining Spiral Separator Gold Beneficiation Separator...
Hydraulic Orange Peel Grab for Hitachi Excavator
Polyurethane Screen Panels Plate Sheet Mesh Mats Dec...